Car glass polishing powder can safely and effectively clean car glass in deep layers without scratching the surface. It can remove the accumulation of water stains, hard water minerals, oil, insects, road salt, wax, tree sap, road dirt, and other stains, making visibility clear. Car glass polishing powder can promote crystal clear glass, clear visibility, and driving safety.
Step 1: Preparation work for glass surface cleaning and glass polishing
1. First, wrap the edges of the glass to be repaired with tape to prevent dirtying the car and surrounding environment during polishing.
2. Carefully clean the surface of the glass and glass polishing sandpaper, without any dust, sand, or other attachments.
3. Before polishing the glass, use a marker to circle the area to be polished and repaired behind the glass to avoid excessive polishing area caused by displacement.
Step 2: Use glass sandpaper with P120 #, P240 #, P400 #, P600 # to eliminate glass scratches
1. Please note that the sandpaper model indicated here is different from the manual sandpaper model used in daily life, and cannot be mixed with sandpaper used in daily life.
2. Pour out a small amount of polishing solution as needed, dilute it with water in a 1:1 ratio, not exceeding 1:5 at most, and use it specifically for sandpaper polishing.
3. Scratches and polished areas must be ensured to have sufficient polishing solution, and sandpaper should not be directly dry ground on the glass surface at any time. A. Deep scratches (noticeable by hand touch): P120 # glass sandpaper for initial grinding - then P240 # sandpaper for smoothing - use P600 # sandpaper for another round of polishing to achieve the final polishing requirement, or skip this step and proceed directly to the third step. B. Slight scratches (no feeling by hand but with white marks): P400 # glass sandpaper initial grinding - use P600 # sandpaper to polish again until the surface meets the final polishing requirements, or skip this step and proceed directly to the third step.
Step 3: Add polishing solution and use a dedicated polishing wheel to polish and restore the transparency of the glass
1. Clean the glass and observe the sandpaper polishing range. Apply polishing solution and use a dedicated polishing wheel (with appropriate pressure, the polishing machine tray should be level with the glass surface) to polish. If there is no polishing machine available, manual polishing pads can be used for polishing. Pay attention to maintaining a straight line movement at this time, do not move too fast, and polish carefully to ensure the effect.
2. If the gloss is poor, repeat the above steps
Our XP-CF glass polishing powder has the characteristics of fast polishing speed and good polishing effect, which can restore the original brightness of car front windshield and is very popular in China.
FAQ
Q: What is your packaging?
A: 25KG per barrel, 20kg per carton
Q: Who are you?
A: We are a professional manufacturer of glass polishing powder with more than 20 years of history. Our glass polishing powder is widely used in glass edge polishing, silver glass cleaning, mirror polishing,glass repair (including car front windshield).
Q: How long can the order be shipped?
A: After receiving the deposit, goods can usually leave the factory within 3 to 15 days
Q: What trading method is usually used?
A: We can accept T/T payment, start production after receiving 30%advance payment, and ship after 70% balance payment.
Q: How to guarantee the quality of your products?
A: 1) Strict detection during production.
2) Strict sampling inspection on products before shipment and intact product packaging ensured.
Hot Tags: automotive glass polish powder, China automotive glass polish powder manufacturers, suppliers, factory, BD Polishing Disc, Durable V Shaped Polishing Wheel, Glass Groove Wheel Polish, Glass Groove Polishing Wheel, Cerium Oxide Polishing Compound, Cerium Oxide Glass Polishing Powder