1. Types of polishing powder
Polishing powder is mainly composed of aluminum oxide, silicon oxide, zirconium oxide, cerium oxide and other ingredients. The hardness of these materials and their chemical properties in water are different, which determines their applicability in different occasions. For example, the Mohs hardness of aluminum oxide and zirconium oxide is as high as 9, while that of cerium oxide and silicon oxide is 7, and the hardness of iron oxide is even lower. In particular, the chemical activity and hardness of cerium oxide are comparable to those of silicate glass, so it is often used for glass polishing.
In order to further improve the polishing speed of cerium oxide, fluorine is usually added to it to enhance its grinding rate. Specifically, 3 to 8 fluorine is added to mixed rare earth polishing powder with a low cerium content; while for pure cerium oxide polishing powder, fluorine is usually not added. It is worth noting that for ZF or F series glass, due to its low hardness and high fluorine content, it is more appropriate to use fluorine-free polishing powder.
2. Detailed explanation of the basic requirements of polishing powder:
(1) Uniform particle size: The particle size of the micro powder of the polishing powder must be consistent within a controllable range to ensure the polishing effect.
(2) High purity: No mechanical impurities are present to ensure the purity of the polishing powder, thereby improving the polishing quality.
(3) Good dispersibility: The powder needs to have excellent dispersibility to promote the uniformity of the processing process. If necessary, a dispersant can be added to further enhance the suspension rate.
(4) Appropriate lattice morphology: The powder particles should have a certain lattice morphology so that they can form sharp edges when crushed, thereby improving the polishing efficiency.
(5) Appropriate hardness and density: The polishing powder needs to be well mixed with water and have appropriate hardness and density to ensure the smooth progress of the polishing process.
In addition, the particle size is crucial to the polishing effect. The larger the particle size of the polishing powder, the stronger its grinding force and is more suitable for materials with higher hardness. However, it should be noted that the particle size of each polishing powder has certain distribution problems. The size of the average particle size or median diameter D50 mainly affects the polishing speed, while the maximum particle size Dmax determines the polishing accuracy. Therefore, to achieve high precision requirements, the maximum particle size of the polishing powder must be strictly controlled.
At the same time, the actual hardness of different materials will also vary. For example, the hardness of aluminum oxide is about 9 on the Mohs scale, but the strength of the agglomerates at different firing temperatures will vary, which will affect the grinding rate and wear resistance of the product. Therefore, manufacturers need to control the hardness of the product according to the characteristics of different materials.
During the polishing process, the concentration of the slurry will also affect the polishing speed. Generally speaking, the higher the concentration, the faster the polishing speed. However, when using small-particle polishing powder, in order to maintain appropriate fluidity, the slurry concentration needs to be appropriately lowered, and it is usually recommended to control it within the range of 7-10%.
3. Selection of polishing mold
During the polishing process, it is crucial to choose an appropriate polishing mold. Generally, it is recommended to use a polishing mold with a softer texture to ensure the polishing effect and accuracy. It is worth noting that many polyurethane polishing sheets are mixed with cerium oxide polishing powder, and the maximum particle size of this polishing powder will directly affect the final polishing accuracy. Therefore, when choosing, special attention should be paid to the performance indicators of the polishing powder.
4. Indicators affecting the performance of polishing powder
The performance of polishing powder is affected by multiple indicators. First, particle size is one of the key factors, which determines the grinding force and application range of the polishing powder. In addition, purity, dispersion, lattice morphology, hardness and density also have an important impact on the performance of polishing powder. When evaluating the performance of polishing powder, these indicators should be considered comprehensively.
1. Powder particle size: Particle size and uniformity are crucial to polishing speed and precision. The mesh size of the sieve can control the powder particle size, while the average particle size reflects the overall level of the polishing powder particles.
2. Powder hardness: Powders with higher hardness have faster cutting effects, and adding grinding aids can also improve the cutting effect. However, it should be noted that the requirements for hardness in different application fields and processing technologies will vary.
3. Powder suspension: High-quality polishing powder should have good suspension. Powder shape and particle size have an impact on suspension, and polishing powder with fine flakes and uniform particle size has better suspension. In addition, the suspension performance can also be improved by adding a suspending liquid (agent).
4. Powder crystal form: The powder is composed of agglomerated single crystal particles, and its crystal form affects the cutting, wear resistance and fluidity of the powder. During the polishing process, the separation (crushing) of single crystal particles will lead to a decrease in cutting and wear resistance. Irregular hexagonal crystal particles show good cutting, wear resistance and fluidity.
V. Application scope of polishing powder:
Commonly used fine polishing materials on the market include alumina polishing powder, cerium oxide polishing powder and silicon oxide polishing powder, etc., which play an important role in their respective fields.
1. Application of alumina polishing powder:
Alumina polishing powder (such as VK-L300F) plays an important role in many fields. It is often used for polishing marble, polishing of metal aluminum and stainless steel, and polishing of metallography (such as acrylic board). In addition, it is also suitable for polishing PCB printed circuit boards, polishing of paints and resins, and fine polishing of jade. Its particle size is usually controlled in the range of 0.2-0.5um to meet different polishing needs.
2. Application of silica polishing powder:
Silica polishing powder (for example, VK-L500F) shows its unique value in specific fields. It is often used for polishing artificial lenses and gemstones, as well as repairing flaws after fine polishing of metal products. Its particle size range is usually between 0.3 and 1 micron, ensuring that it can effectively cope with various polishing challenges.
3. Application of cerium oxide polishing powder or polishing liquid (such as VK-Ce02W):
This type of polishing material is designed for polishing lenses, TV tubes, eyeglasses, wafers, and various optical components, optical fibers, art glass, electronic glass, and flat glass. Its primary particle size is usually controlled at 20-30 nanometers, and the secondary particle size is required to reach 0.2 microns, ensuring excellent results in various polishing applications.
