Selection method and precautions for rare earth polishing powder

Aug 04, 2024

Leave a message

1. For optical processing enterprises, four factors should be considered when choosing polishing powder:
(1) Polishing accuracy and speed: Speed and accuracy are contradictory, and companies should first determine the required polishing accuracy and then consider speed as quickly as possible. The accuracy and speed are related to the particle size and hardness of the polishing powder. The smaller and softer the particles, the higher the precision of the product, but the cutting rate is also low and the polishing speed is slow. The polishing accuracy and speed are not only related to the performance of the polishing powder, but also to factors such as polishing pressure, speed, pH value of the polishing solution, and the absence of abrasives.

12386036248743776157

(2) Polishing method: Determine the suspension requirements of the polishing powder, such as high-speed polishing, which requires better suspension requirements.
(3) Processing surface shape: Spherical polishing requires particles to be spherical with good flowability, and generally uses polishing powder produced by oxalate method; Flat polishing does not require high fluidity.
(4) Working environment: The color of the selected polishing powder is brownish red or white.
2. Related to the application performance of polishing powder, the evaluation indicators of polishing powder are as follows:
(1) Particle size: determines the polishing accuracy and speed, generally expressed in terms of mesh size and average particle size. The screening score reflects the size of the largest particle, while the average particle size determines the overall level of polishing powder particles.
(2) Hardness: Particles with higher hardness have faster cutting rates, and adding grinding aids can also improve cutting rates;
(3) Suspension: High speed polishing requires polishing powder to have good suspension, and particle shape and size have a significant impact on suspension. Flake polishing powder and small particle polishing powder have better suspension. The improvement of suspension can also be achieved by adding suspension agents.
(4) Particle structure: Whether the particle structure is agglomerated particles or single crystal particles determines the wear resistance and flowability of the polishing powder. Agglomerated particles break during the polishing process, leading to a decrease in wear resistance. Single crystal particles have good wear resistance and flowability.
(5) Color: It is related to the content and temperature of the raw materials. The higher the content, the more brownish red the polishing powder becomes. Low oxide polishing powder contains a large amount of oxides, resulting in a brownish red color. For pure oxide polishing powder, the baking temperature is high, and the color of the polishing powder is white and red, while the temperature is low, and the color is light yellow.