The use of glass polishing discs mainly involves preparation before polishing, operations during the polishing process, and cleaning and inspection after polishing. Here is a detailed user manual:
1, Preparation stage
Choose the appropriate polishing disc:
Choose a suitable polishing disc based on the material, hardness, and polishing requirements of the glass. Common polishing disc materials include felt, hard asphalt, non-woven fabric, polyurethane, polytetrafluoroethylene, etc. Soft flint glass should be polished with soft abrasives, while hard silicate glass and quartz glass should be polished with hard abrasives.
Prepare polishing tools and materials:
Glass polishing machine: Ensure that the machine operates normally and the power cord is safe and undamaged.
Polishing agent: Choose the appropriate polishing powder or paste according to the type of glass and polishing requirements. Commonly used are aqueous suspensions of metal oxides such as iron oxide, cerium oxide, and lanthanum oxide.
Polishing disc: Ensure that the polishing disc is flat and undamaged, and matches the glass polishing machine.
Water spray bottle (optional): used for spraying water to cool down and clean during the polishing process.
Gloves, masks and other protective equipment: protect operators from the effects of dust and noise.
Clean the glass surface:
Thoroughly clean the glass surface with water and paper towels to remove dirt, grease, and other impurities to avoid affecting the polishing effect.
2, Polishing process
Install the polishing disc:
Fix the polishing disc onto the rotating shaft of the glass polishing machine, ensuring a secure installation.
Adjust the polishing machine:
Adjust the speed of the polishing machine according to the polishing requirements, generally controlled within an appropriate range to ensure polishing effect and safety.
Apply polishing agent:
Apply an appropriate amount of polishing agent evenly on the polishing disc, paying attention to controlling the amount to avoid waste and excessive polishing.
Start polishing:
Place the glass on the polishing machine and adjust its position so that the glass surface is parallel to the polishing disc.
Turn on the polishing machine and rotate the polishing disc at high speed, then gently press the polishing disc onto the glass surface for polishing.
During the polishing process, it is necessary to maintain even contact between the polishing disc and the glass surface, avoiding scratches caused by tilting or uneven force.
If you need to spray water for cooling and cleaning, you can use a water sprayer to spray water at the appropriate time.
Check the polishing effect:
During the polishing process, it is necessary to regularly check the polishing effect. If scratches or defects are found, the polishing method and intensity should be adjusted in a timely manner.
3, Polishing post-treatment
Clean the glass surface:
After polishing, rinse the glass surface with clean water to remove residual polishing agent and debris.
Wipe the glass surface dry with a dry cloth to ensure there is no residual moisture.
Inspection and re polishing:
Carefully inspect the glass surface for scratches or defects, and if necessary, polish it again.
Maintenance and Storage:
The polished glass surface should avoid contact with sharp or rough objects to prevent scratches.
Regularly wipe the glass surface with a clean damp cloth to maintain cleanliness and avoid using cleaning agents or abrasives containing chemicals.
When storing, choose a dry and cool place to avoid direct sunlight to prevent cracks or deformation on the glass surface.
In summary, the use of glass polishing discs requires attention to the details of each step to ensure the polishing effect and the safety of the glass surface.
How To Use Glass Polishing Disc
Aug 18, 2024
Leave a message
