Three Factors Affecting The Production And Processing Of Rare Earth Polishing Powder:

Aug 05, 2024

Leave a message

(1) Raw materials: The raw materials for producing polishing powder are divided into three types: high oxide polishing powder is produced using nitrate or chloride, and the polishing powder particles produced using nitrate have better performance; Rich oxide polishing powder is produced using chloride, and the polishing powder is white; Low oxide polishing powder is produced using mixed carbonate rare earth or fluorocarbon oxides, with a color of brownish red.
(2) Precipitation agents: Precipitation agents used in the production of polishing powder include oxalic acid and ammonium bicarbonate. Oxalate polishing powder has a single crystal structure, good flowability, and easy settling, and can be classified by hydraulic grading. Carbonate polishing powder has a sheet-like aggregate structure with good suspension, but poor wear resistance and flowability. It is generally used for flat polishing.
(3) Classification method: Polishing powder should be classified before application, generally including hydraulic settling, wet screening, dry screening, hydraulic suspension classification, air flow classification, etc. The polishing powder produced from oxalate is generally classified by wet sieving or hydraulic suspension flow; Most polishing powders made of carbonate are graded by airflow.