What Are The Difficulties in Processing And Manufacturing Polishing Wheels?

Aug 06, 2024

Leave a message

Polishing wheel is a very common consumable, so do you know what problems this polishing wheel has in processing and production?
Polishing wheels are used for polishing to increase the color of the workpiece, but once the color of the wheel is not good enough, it can endanger the quality of the polished workpiece. So, what problems do polishing wheels need to solve during processing and production.
In order to keep the polishing wheel soft and make it even softer, the stitching line is often empty during the processing and production of the polishing wheel to maintain a good spacing between the wheel edges. The polishing wheel for non suture whole cloth processing should be made of delicate and soft cotton cloth, which is more suitable for fine polishing of workpieces with messy shapes or small and medium-sized workpieces. The polishing wheel made of suture processing should use old coarse cloth, protective cloth, and their flat cloth. The suture can use concentric circles or spiral straight radiation sources, suitable for polishing various coatings and simple appearances.
The polishing wheel processed by air-cooled cloth wheel adopts a 45 degree angle line cutting, forming circular folds. The base is equipped with metal material discs, which have the characteristics of natural ventilation and heat pipe heat dissipation, making them more suitable for polishing large and medium-sized workpieces. The common troubleshooting issues in the application of polishing wheel grinding and polishing machines are as follows. Firstly, check the common faulty areas. If the server cannot rotate after startup, you can connect the switch power supply to repair the worm gear box. If it is not good in the future, send it to the repair center for repair; If the motor cannot start, you can connect the switch power supply, press and hold the reset switch of the thermal relay, or disassemble the AC contactor and fuse for testing; If the polishing tube bends severely after polishing, the working pressure of the axis and grinding wheel can be adjusted again; If the polishing tube is not bright enough after polishing, you can remove the polishing wheel, wax, or adjust the grinding head wheel; If the grinding head seat causes vibration during the polishing process, the polishing wheel can be ground or disassembled.